Search the forum,

Gas safe renewal

Post new thread

Discuss Gas safe renewal in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

plumbdoctor

I have just renewed mine, and my acs is due in May so they have only valid it until then once I have my acs I won't have to pay again will I ? Should be sent a new card till October ?
 
Cant understand this ! thought all renewal's were done in April ???
 
Just spoke to them, it carries on automatically but if you want a new card you have to pay haha
 
plumbdoctor said:
Just spoke to them, it carries on automatically but if you want a new card you have to pay haha
Click to expand...

WHAT ! you have to pay extra, my god whatever next ? think the words rip off / con / thieving gits are a few that spring to mine'd
 
Status
Not open for further replies.

Reply to Gas safe renewal in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
521
FozzieBear
F
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
305
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
392
Chuck
C
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
275
Chuck
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
177
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical News
Tilezine Tiling News Tile Association
Electrical Advice
Tiling Tools
Contractor Advice Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock