Discuss Halstead HE30 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

merv

Plumbers Arms member
Plumber
Gas Engineer
Messages
86
Has anybody had any experience with a leak coming off the diverter motor at the bottom of the hydro block. Will replacing the diverter motor solve this or does the hydro block need to be changed. I don't want to fiddle with it in case it gets worse. I naturally would like to get the parts first.

Any help appreciated !!
 
Well I would assume the leak is coming from the block its self so yes change the block
 
Last edited by a moderator:
I agree, even technical support is charged at 90p a minute on a 090 number.
 
Status
Not open for further replies.

Reply to Halstead HE30 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
290
Hi, My Blanco Kitchen Tap Model Swift BM1420 is leaking. Please see attached photos for details of where water leaks from. What I've done so...
Replies
2
Views
282
Hi Folks, I have a challenge with a Main Eco Elite 30 Combi which is short cycling on the CH. Water works fine. As soon as you have call for...
Replies
6
Views
442
Hello all, I have a WorcesterBosch Greenstar 42CDi classic combi, which is providing DHW fine, but not heating. Was working fine in spring...
Replies
11
Views
1K
Hello. I've just replaced our old Potterton EP2 CH controller with a Drayton Wiser HubR (& peripherals). The old backing plate wasn't...
Replies
1
Views
308
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock