Discuss Heimier Remote TRV: As rare as hens teeth, or am I looking in the wrong places? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

Harlequin

Hi,

I have an underfloor water heating system. A Heimier remote TRV is located close to the heating manifold, in order to regulate the temperature of the water flowing through the system.

I now need to replace the TRV - just the thermostatic screw on 'head' (if they come separately), complete with wire to link to the remote sensor.

Questions: 1) Any one know where I can source one of these Heimier remote TRVs (I live in SW London). It's proving tricky to find one. 2) As an alternative, are there any other brands of remote TRV that have thermostatic heads that will fit the Heimier male screw fitting on the metal valve?

All responses much appreciated.

Thanks.
 
Uponor use a remote trv on some of their underfloor heating manifolds.
 
Thanks for the responses so far. Have had a tip that Pipe Centre may stock them, so off to check. Will also check the website.
 
Status
Not open for further replies.

Reply to Heimier Remote TRV: As rare as hens teeth, or am I looking in the wrong places? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock