J Jarvo273 Messages 15 Jun 2, 2019 #1 Hi I'm a home owner as was going someone here could help me identify my toilet filler valve and where I can source it? Thanks Neil
Hi I'm a home owner as was going someone here could help me identify my toilet filler valve and where I can source it? Thanks Neil
A Aire Jun 2, 2019 #2 Its a fluidmaster, most plumbers merchants will sell them or you can get them from screwfix.
townfanjon Esteemed Plumber Gas Engineer Subscribed Messages 8,642 Jun 2, 2019 #3 Buy one with a brass tail , there still plenty of the plastic ones available
JCplumb Esteemed Plumber Messages 2,774 Jun 2, 2019 #4 Or don't worry about the tail, you can just pull that grey plastic ring up (on the stem in the cistern) then pull the top half of the valve out and replace with the top half of a new valve. Is that a dauntless elite cistern by the way?
Or don't worry about the tail, you can just pull that grey plastic ring up (on the stem in the cistern) then pull the top half of the valve out and replace with the top half of a new valve. Is that a dauntless elite cistern by the way?
B Burger Jun 2, 2019 #5 What’s the reason for renewing the valve? Diaphragm should are available if it’s a noise/not shutting off issue.
What’s the reason for renewing the valve? Diaphragm should are available if it’s a noise/not shutting off issue.
Steve weightman Gas Engineer Messages 186 Jun 2, 2019 #6 It's the older type of fluidmaster I'm one for repairing but for the sake of £8+ I'd replace it