Discuss Help with carrying out a cp12 in the Gas Engineers Forum area at PlumbersForums.net

Messages
4
Evening Newbie here

A quick question about flue distances found
On cp12. Are these ok window is a top opener, if incorrect use of pmk how would I record this.
20200604_163104.jpg
 
its fine / acceptable
 

Reply to Help with carrying out a cp12 in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
305
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
347
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
284
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
358
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
625
Back
Top