Discuss ..hmmm something new.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

MFD price per unit - its not available to non end user yet I have offered to set up a discounted price to ukpf members so members can make a profit and do the fitting - when ukpf let me know its ok then off we go on here. At present its on sale to housing trusts etc who are pre-ordering 10+ with 24 hour delivery took one order for 100 for September delivery today - they have 5000 rentals
 
So does it keep filling the system to a set pressure? What happens if you get a big leak, split rad for instance. House flooded? Not being funny, just curious

The many similar autofill systems that have been used on Commercial sytems for years have a Time limit / no of attempts to fill setting to stop this.
 
I reckon the Jepp Cone looks brilliant but maybe best for new installs as tricky to install when pan is in situ as others have said. But then again he did mention an allen key fitting? So that would be easy enough I reckon.

I'd probably still apply a very thin ring of plumbers mate on the outside between two of the ridges to take up difference in any tiny flaws, nobbles because not sure whether it expands so uniformly that it can be super tight but not fully water tight as is case with so many things.

Final consideration is flush cones cost a few quid and if the right one for the pan (euro/uk etc) is chosen and fitted correctly (plumbers mate (if using anything) so stays flexible not silicone which can leak after time) it has a good chance of lasting leak free and so this best be comfortably under a tenner.
 

Reply to ..hmmm something new.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone recommend a toilet, sink plunger. It’s not something I do a lot of, but it will be handy to carry on the van, for when needed. Don’t...
Replies
2
Views
122
How to fix this? I am in a pickle here. Have to converge water two pipes into one. He fixed something honey trap or something idk.
Replies
0
Views
323
Hello I’m hoping for some perceptive / input as I’m a long-distance landlord trying to unpick the best thing to do. Gas safety certificate was...
Replies
1
Views
258
    • Like
Hi All, So something may be slightly different to the usual posts and looking for some advise or whether anyone has been in a similar predicament...
Replies
13
Views
2K
Seems to be some flaws in the brass of this tap (faucet?). It has fine scribbly black lines crossing from the inner of the pipe to the outside...
Replies
5
Views
361
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock