Discuss ..hmmm something new.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

MFD price per unit - its not available to non end user yet I have offered to set up a discounted price to ukpf members so members can make a profit and do the fitting - when ukpf let me know its ok then off we go on here. At present its on sale to housing trusts etc who are pre-ordering 10+ with 24 hour delivery took one order for 100 for September delivery today - they have 5000 rentals
 
So does it keep filling the system to a set pressure? What happens if you get a big leak, split rad for instance. House flooded? Not being funny, just curious

The many similar autofill systems that have been used on Commercial sytems for years have a Time limit / no of attempts to fill setting to stop this.
 
I reckon the Jepp Cone looks brilliant but maybe best for new installs as tricky to install when pan is in situ as others have said. But then again he did mention an allen key fitting? So that would be easy enough I reckon.

I'd probably still apply a very thin ring of plumbers mate on the outside between two of the ridges to take up difference in any tiny flaws, nobbles because not sure whether it expands so uniformly that it can be super tight but not fully water tight as is case with so many things.

Final consideration is flush cones cost a few quid and if the right one for the pan (euro/uk etc) is chosen and fitted correctly (plumbers mate (if using anything) so stays flexible not silicone which can leak after time) it has a good chance of lasting leak free and so this best be comfortably under a tenner.
 

Reply to ..hmmm something new.. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
238
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
243
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
986
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
234
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
318

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock