Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Ideal classic sensing point cap not pn 171505 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
14
Wondering if anyone knows the part number for the old black sensing point cap on an ideal classic ff260? Ideal don't and the new white cap doesn't fit. It's the model with the blue pipe leading to a fitting that screws into the box. Looked everywhere and seems a shame to I.d. The boiler when I'm sure this can be sourced eventually.
Thanks in advance
 
Status
Not open for further replies.

Reply to Ideal classic sensing point cap not pn 171505 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
252
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
321
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
288
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
303
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
540
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock