Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Ideal Concord WRS 255A pipe connections? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
need to do a good power flush on system and fit a ch filter , if they dont want it then list on benchmark customer refuse to have one or anything similar
 
replaced same boiler few months back. follow pipes from cylinder for your hw/cold run and use your boiler flow/return for your heating run. mark your pipes before you cut them :D and its gonna be some scrap as well after you remove all that excess pipework in the cupboard.
 
Status
Not open for further replies.

Reply to Ideal Concord WRS 255A pipe connections? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
188
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
318
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
241
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
216
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
157
Sonya K
S
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock