wanttolearn
Gas Engineer
- Messages
- 100
Hi I'm fitting a new heating system right the way through a property before the boiler and last radiator gets fitted I wanted to test the pipework which I've already done.
I have already tested under floor boards etc that was ok
So when I've tested it after fitting all other rads I've lost three quarter of a bar overnight but I can only test it with compressed air as that's all I got.
I have been around all joints checking and nuts on valves but can't find no leak it's driving me potty
Any help on what I can do next as new carpets are being laid today
I have already tested under floor boards etc that was ok
So when I've tested it after fitting all other rads I've lost three quarter of a bar overnight but I can only test it with compressed air as that's all I got.
I have been around all joints checking and nuts on valves but can't find no leak it's driving me potty
Any help on what I can do next as new carpets are being laid today