Increasing Hot Water pressure (Shower)

[Unregistered]

Hi Guys

would somebody be kind enough to advise what the best way is to increase the hot water pressure from the shower please? we have a conventional boiler setup.

Many Thanks

 

[Best]

Hello. You need to register with a user name on this forum to receive answers.
Better to then repost

 

[SmokeyJ]

Difficult to give a definitive answer without knowing more about the system/shower type. Fitting a shower pump usually. Only thing is if you don't have designated shower supplies you would have to pump whole house, meaning pump running when someone flushes toilet at night. Not ideal but easiest option, have a few customers that only switch it on when they need to shower in that scenario. Or run a separate shower circuit and pump that, if its not too much disruption and shower supplies can be accessed.
If you have a separate shower circuit then not too big of a job. A decent shower pumps not cheap though.
Many options, get a couple of plumbers round to do some quotes.

 

[SmokeyJ]

Am I not supposed to reply to Unregistered/Guests??

 

[Best]

Am I not supposed to reply to Unregistered/Guests??

We try not to now, but problem is unregistered guests can post. This could also let different people pretend they are the original poster.
The Mods keep closing any threads posted by unregistered

 

[Dotty]

Please register with us and start a new thread to receive additional answers to your question.