Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss Installation TF1 Omega different angle. Can this works? in the Central Heating Forum area at PlumbersForums.net
- Messages
- 34,367
- Solutions
- 2
No that’s fine
Reply to Installation TF1 Omega different angle. Can this works? in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
Hi,
My current hot water system needs to be replaced.
Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
- Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered.
A Plumber in Herefordshire was...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Newest Plumbing Threads
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 0
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 2
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0