Discuss Integrated fridges... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
Is there space at the bottom to run 3 22mm pipes behind? I cannot remember
 
They are all different muts, 15 mm probably , just. 22 dont know lol
 
I know they're supposed to have a gap to breathe at the back hey. I guess 15mm could work
 
Is there space at the bottom to run 3 22mm pipes behind? I cannot remember

Replaced one for sister a few months back and the "floor" of the cupboard didn`t go all the way to the back, think there was around a 4" gap but as said probably not all the same mutley.
 
Unless it's from ikea I carcasses an entire kitchen only to discover when the kitchen and appliances arrived there is no void
 
Normal you need to put dishwasher and fridges on work top to raise them up so it could be a maybe
 
Status
Not open for further replies.

Reply to Integrated fridges... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
648
Hi, I would like to connect up water supply to fridge. Behind the fridge there is 15mm isolation valve installed however filter connector has...
Replies
2
Views
524
Hi thank you for letting me join this forum . We have an air to water heat pump but the bungalow is piped in micro bore 10mm pipe which doesn’t...
Replies
4
Views
368
Where and how does the water supply work and is there only one rising main pipe and where is it usually located? I am top floor flat, mains fed...
Replies
2
Views
596
In my last posting, I requested assistance in exchanging a waste that had been fitted using silicone, without actually removing the basin. Mission...
Replies
15
Views
1K
Back
Top