Search the forum,

Is That A New Sponsor?

Post new thread

Discuss Is That A New Sponsor? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
SimonG

SimonG

Esteemed
Plumber
Subscribed
Messages
21,055
Copper Bits,

or am I behind the times?
 
Not guilty M'Lud.

I'm going for CCTS, a training establishment in Belfast.
 
Just thought it a little bit funny that in the contact details the address is listed as 'coming soon'.
 
First I've heard of them but they could be handy being in my stomping ground and all. They don't have an address yet though.
 
Status
Not open for further replies.

Reply to Is That A New Sponsor? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
246
Firefox
F
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
266
pritchardsplumbing
P
B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
325
Bp89
B
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
159
Lou
Lou
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
276
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
UK Tiling Forum
Tiling Forums
UK Tiling Forum
Electrical Forum for Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock