G Gordon T Plumbers Arms member Plumber Gas Engineer Messages 120 Jul 22, 2019 #1 Can anyone tell me if the new Logic boilers are a direct replacement for an Isar? Due to quite tight spacings, Im looking for a straight swapout if possible. G.
Can anyone tell me if the new Logic boilers are a direct replacement for an Isar? Due to quite tight spacings, Im looking for a straight swapout if possible. G.
Harvest Fields Esteemed Plumber Gas Engineer Subscribed Messages 10,442 Jul 22, 2019 #2 Not sure but doubt it.
B Burger Jul 22, 2019 #3 Get the technical drawing from their website and you might get a better idea.
G Gordon T Plumbers Arms member Plumber Gas Engineer Messages 120 Jul 22, 2019 #4 I was just hoping someone would be able to give a definite yes or no. I will contact Ideal tomorrow if no replies.
I was just hoping someone would be able to give a definite yes or no. I will contact Ideal tomorrow if no replies.
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,131 Jul 22, 2019 #5 Pipe layout is the same But you are going to have to replace the bracket and probably cut the pipes and reconnect.
Pipe layout is the same But you are going to have to replace the bracket and probably cut the pipes and reconnect.
Scott_D Esteemed Plumber Gas Engineer Subscribed Messages 6,131 Jul 22, 2019 #6 Fit something with a jig if space is tight?
king of pipes Esteemed Plumber Gas Engineer Subscribed Messages 6,157 Jul 24, 2019 #7 Not a straight swap will need to recipe it . Kop
M Millsy 82 Plumbers Arms member Plumber Gas Engineer Messages 4,352 Jul 24, 2019 #8 Not a direct swap but as close as you will get. I've taken an isar out and put an independent in (which is the same I believe) and only had to alter the return so I could fit a filter in.
Not a direct swap but as close as you will get. I've taken an isar out and put an independent in (which is the same I believe) and only had to alter the return so I could fit a filter in.