Search the forum,

Discuss I've just been given a Rofrost Turbo 2 freezer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Masood

Didn't realise they were so pricey, I'm blown away! It's a 110V and he gave me a transformer as well. Apparently one clamp doesn't freeze brilliantly. Any recommendations as to where to get it looked over and re-gassed if necessary?
 
Yeah I had the same problem with my Freezemaster.
Cost me about 40quid to get it fixed
 
Must find one to do mine , who gave it too you mas someone packing up ?


No, he's not packing up but doesn't really use it and it's taking up space in his van. He was going to bin it otherwise. Mental, really - could have got a few quid on ebay...
 
No, he's not packing up but doesn't really use it and it's taking up space in his van. He was going to bin it otherwise. Mental, really - could have got a few quid on ebay...

You can send me a few quid if it helps ease your guilt mate??
 
I can't find anyone to recharge mine, two have said its to expensive to dispose of the old fluid or summat like that
 
If need needs re gassing it will probably be empty but they only hold a couple of kilos at most and getting rid of any refrigerant is no big deal for any decent refrigeration fella, pity your not closer to me Ive done loads
 
If need needs re gassing it will probably be empty but they only hold a couple of kilos at most and getting rid of any refrigerant is no big deal for any decent refrigeration fella, pity your not closer to me Ive done loads

Little side line for ya regasing everyones freezers
 
Status
Not open for further replies.

Reply to I've just been given a Rofrost Turbo 2 freezer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
229
P
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
252
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
280
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
208
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock