Discuss leaking tundish and electric flips in the Central Heating Forum area at PlumbersForums.net

Messages
1
water constantly running through tundish and electric flip when turn heating on.

IMG_20220614_103518568.jpgIMG_20220614_103448451.jpgIMG_20220614_103454906.jpgIMG_20220614_103507412.jpgIMG_20220614_103437123.jpg
 
Needs servicing ASAP by a plumber who is qualified to work on unvented hot water systems, also known as 'G3 qualified'. Check they have this when making your booking.

Not a DIY job, I'm afraid.
 

Reply to leaking tundish and electric flips in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
194
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
274
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
286
PSxxxxxx
P
Hi all I need to run this CH pipework to a radiator located beyond the electric wiring in the image below. Just to be safe I was wondering if...
Replies
3
Views
245
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
225
Back
Top