Search the forum,

Learn how to install domestic solar hot water (DSHW) systems

Post new thread

Discuss Learn how to install domestic solar hot water (DSHW) systems in the USA area at PlumbersForums.net

CorgiDirect

CorgiDirect

Messages
337
03420973L-1.jpg


corgidirect-domestic-solar-hot-water-03420973L.jpg


CORGIdirect Domestic Solar Hot Water Systems Manual - EEM2. This manual is intended for engineers who are trained in designing and installing domestic heating systems, who also wish to learn how to install domestic solar hot water (DSHW) systems -

https://corgi-direct.com/corgidirect-domestic-solar-hot-17950-3420973​
 

Reply to Learn how to install domestic solar hot water (DSHW) systems in the USA area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
180
Lou
Lou
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
334
oz-plumber
O
Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
215
Lou
Lou
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
353
John.g
J
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
399
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
Tile News
Tile Forum
Electrical Blog
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock