Local numpty plumbers

[townfanjon]

I will just let you have a laugh at this , sorry the pic doesn’t show much detail . Thermal stores with unvented components lol lol

 

[chris watkins]

Please don't give the person who installed that the title "Plumber", clearly someone using push fit to connect copper together is not a member for my trade.
Whats with the safety valve on the mains to the cistern ??

& they seem to only have 400mm lengths of 15mm perhaps their bag was only that long.

 

[Riley]

We need a face palming emoji

 

[Last Plumber]

Crikey Maud!

 

[rpm]

Whats with the safety valve on the mains to the cistern ??

& they seem to only have 400mm lengths of 15mm perhaps their bag was only that long.

Is it to make sure that dodgy looking connection on the Tee stays in place?

 

[Riley]

Can you elaborate TFJ

 

[townfanjon]

Sorry guys had to fly out ...
I installed the cylinder around 6/7 years ago , old lady sadly died . New guy moves in , no hot water , I opens the cupboard and sees this load of *****. Multibloc, tundish , ex valve fed from all directions , cylinder header tank overflow disconnected etc etc . The guy said the plumbers he got in to do his bathroom did this to the cylinder lol .
I said it was wrong , he's had a word with his plumbers and they say its correct and I am wrong ..
So there you go lol

 

[Riley]

Dear lord

 

[ShaunCorbs]

Sorry guys had to fly out .
I installed the cylinder around 6/7 years ago , old lady sadly died . New guy moves in , no hot water , I opens the cupboard and sees this load of *****. Multibloc, tundish , ex valve fed from all directions , cylinder header tank overflow disconnected etc etc . The guy said the plumbers he got in to do his bathroom did this to the cylinder lol .
I said it was wrong , he's had a word with his plumbers and they say its correct and I am wrong ..
So there you go lol

please say you asked why it needed all the extra parts?

 

[king of pipes]

Oh my gawd what on earths going on there Town a classic case of a little bit of knowledge can be dangerous, I would get the installation diagram of how it should be fitted and prove the cylinder is now fitted incorrectly and send it to the dick . Kop

 

[Rob Foster]

Dear lord

is TFJ on weed ?

 

[Sharp Point]

OMFG....

Heaven help us, typical snapshot of today’s talent I’m afraid

 

[Ben-gee]

They maybe think it will turn the fortic tank into an unvented cylinder and therefore improve performance?

 

[Sharp Point]

I’ve just thought, on a serious note TFJ. They haven’t tried converting it to a unvented have they? capped the cold feed to the cylinder? With them not knowing it’s a thermal store.

 

[townfanjon]

I’ve just thought, on a serious note TFJ. They haven’t tried converting it to a unvented have they? capped the cold feed to the cylinder? With them not knowing it’s a thermal store.

Jesus wept , I wouldn’t doubt it .

 

[Burger]

Have Bert and Ernie been fitting again?

 

[Last Plumber]

So am I right in thinking they've converted an open vented cylinder to an unvented?

 

[Sharp Point]

So am I right in thinking they've converted an open vented cylinder to an unvented?

It’s a thermal store LP

 

[townfanjon]

So am I right in thinking they've converted an open vented cylinder to an unvented?

I dont think they know what they have done to be fair .

 

[Burger]

I dont think they know what they have done to be fair .

Yet they're right and you're wrong?

 

[Riley]

Of course

 

[Jerry]

Safety first!

 

[Last Plumber]

I dont think they know what they have done to be fair .

No, I see that. It's as if they had a box of plumbing bits and said "let's use all these today"!