Search the forum,

Discuss Looking for experienced plumber in Southport Area - numerous jobs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Hi,

I am in need of an experienced plumber for the following jobs:

bathroom:

Remove exisiting toilet.
Fix new toilet.

Fix new wash basin and pedestal.
Run new hot and cold pipes to wash basin.
Fit new waste pipe from wash basin to drain.

Fix new radiator
Run flow and return pipes along skirting board to radiator.

Back bedroom:

Remove exisiting small cold water feed tanks from cupboard.
Fit new larger tank.

I am located in Southport - between Liverpool and Preston.

I can provide more details or pictures if needed.
Would prefer and old school local plumber.

Or if anyone could recommend a plumber in my area that doesn't use this forum - that would be a great help.

Thank you
 
Status
Not open for further replies.

Reply to Looking for experienced plumber in Southport Area - numerous jobs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
196
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
121
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock