Search the forum,

Discuss Looking to work towards my NQ2 Level 2 ( Maidstone Area ) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Amm07

Hi,

I am a student who finished their Plumbing and Heating Level 2 in the summer of June 2016, currently looking for a trainee or an apprenticeship role in order for me to achieve my NVQ Level 2, willing to locate 20 miles radius from Maidstone, plus I have my own transport.

Thank you for taking the time to read my post, if there is any vacancy out there and any question you want to ask me then please do not hesitate to inbox me.

Many Thanks,
 
If anyone in the Kent area can help out, please drop the OP a pm.
 
Status
Not open for further replies.

Reply to Looking to work towards my NQ2 Level 2 ( Maidstone Area ) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
236
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
281
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
93
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
473
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
132
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock