Discuss MAPP Gas Cannister Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Z

ziggy

Hi,

Is the 400gms size of MAPP gas cannister the smallest size available or are there any smaller sizes out there.

Same question goes for Propane gas cannisters i.e. what is the smallest size available.
 
thought they were just one size,never seen them bigger or smaller,not for my super fire anyway.HTH
 
Status
Not open for further replies.

Reply to MAPP Gas Cannister Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
234
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
271
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
325
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
303

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock