S
so-solar
Looking for a press gun and jaws? cash waiting
Discuss Mapress rems gerberit in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 7,711
Pipe center had a deal on with them other week
M
Michael david
Have a look in bss thats were are company get them. ridgid ones are the best with the makita batteries
- Messages
- 12,702
Are you the same unregistered poster looking for a gay plumber? If not then I suggest you register and repost then we know whom to respond to.
Last edited by a moderator:
D
Dotty
Thread closed.
- Status
Reply to Mapress rems gerberit in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
-
- Question
I’m moving from USA to the UK and with my tools is my Milwaukee ProPress gun. I am under the assumption that I will need to leave the 1/2” 3/4”...
Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so...
Looking at replacing a stainless steel welded 90 metre water system in press fit. Its going to cost about £18k in Mapress but I have seen M-Press...
Hi everyone, I think this topic may have been covered before? I'm looking at getting a press gun, more specifically the Novopress, it's just my...
Hi All
Looking to purchase a press fit tool and considering many brands. I don’t do a lot of pipe work, so don’t need a heavy duty one. Hot works...
Newest Plumbing Threads
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 0
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0