C
craiglancs
Check this out guys. My mate rents a house, he sent me these photos to which I said it needs cutting off and replacing, but British gas have come round and said it's fine....
Discuss Mates boiler spilling and British Gas say it's fine in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I know he can't take the cover of mate but he said it wasn't even screwed on. I'm a gas safe engineer,,,, and looking at his photos I said I'm coming over to cap the boiler, but he's called British gas to look at it who said it's fine. That's massive signs of spillage to me. What's wrong with them? There telling him it's heat staining which it defo isn't in that pattern, and the fact he's swiped his finger through it and it's rubbed off.
Is that an ISAR.
I wonder if the ionisation pins have gone previously. Burner overheats and can cause that. Or of course it could be faulty now as you say.
Need to establish if Its new damage or old damage prior to a repair.
Most likely heat, would need to inspect it though. I've had loads leaking poc from the flue manifold arm that connects on to main heat ex. View attachment 25059
Reply to Mates boiler spilling and British Gas say it's fine in the Plumbing Jobs | The Job-board area at PlumbersForums.net