F footprint Messages 18 Feb 27, 2016 #1 Has anyone had experience of fitting the Mcalpine ARB-1 if so my questions are. 1. Are they very successful. 2. Can they be Incorporated in the Mcalpine flexi WC connector, and if so how and where. All help with this one would be much appreciated.
Has anyone had experience of fitting the Mcalpine ARB-1 if so my questions are. 1. Are they very successful. 2. Can they be Incorporated in the Mcalpine flexi WC connector, and if so how and where. All help with this one would be much appreciated.
K Knappers Plumbers Arms member Plumber Gas Engineer Messages 997 Feb 27, 2016 #2 Never seen one but mcalpine stuff is always good in my experience. Why would you need one?
J joni os Plumbers Arms member Plumber Messages 1,498 Feb 27, 2016 #3 Slide existing seal off end of pan connecter and replace with ARB-1
P PlumbBobBob Mar 1, 2016 #4 yes these work I had to fit two on a job I had where two toilets were going into the same soil. no cross flow at all reported after a year or so.
yes these work I had to fit two on a job I had where two toilets were going into the same soil. no cross flow at all reported after a year or so.