Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Minimum flow and pressure expected in the USA area at PlumbersForums.net

Riley

Super Moderator
S. Mod
Plumber
Gas Engineer
Subscribed
Messages
10,855
Evening chaps, I realise that different parts of the country will differ in terms of pressure and flow in coming but is anybody else noticing a trend that guaranteed litres per minute is coming down and down as confirmed by providers?

I have two recent quotes both large family houses where unvented cylinders would be the obvious choice but further to enquiring with the local water board they have confirmed that they will only provide eight and 9 L per minute respectively and even said in one of their emails that a stored water system should be used, I’m really not sure where we stand with this? Even with an upgraded incoming mains we probably still aren’t going to get into acceptable figures for a pressurise cylinder. We are probably going to struggle to get anywhere acceptable with a Combi boiler

I was always taught that 12 L a minute was the minimum they should be offering but the figures above are getting into the realms of somebody only being able to have a gravity system which in this day and age is just bonkers
 
1.5 bar and 8lpm for my area and they even quibble if it’s 6lpm
 
What are you doing mate? Are we talking accumulators are we talking a mains pump. It just sounds to me like even by upgrading the incoming mains you have no guarantee of improvement. For a provider to be suggesting a cwsc fills me with dread as to the customers response. Might be best swerved
 
At that pressure you only have one choice break and pump only accumulator if pressure is good eg 3 bar
 
In my area it's 10 meters of head and 9 ltrs a minute this is the lowest permitted supply pressure and flow by law. Kop
 

Attachments

  • Screenshot_20220207-180107.png
    Screenshot_20220207-180107.png
    212.6 KB · Views: 10

Reply to Minimum flow and pressure expected in the USA area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
549
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
215
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
215
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
306
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
310
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock