Mystery fitting type?

[ggsoed2]

Does anyone know please what kind of fitting this is? I have hot cold wallmounted faucets for a bathroom basin. The original taps (pictured were not gripping and slipping around the pipe)I was told by a plumber that he couldn't find any similar taps with a fitting like this (some sort of import?). I am looking to replace with a separate tap and h/c Grohe faucets, some of these require their own concealed units though. Ideally I'd just replace the faucets with something like for like but i'm not opposed to the extra work of having the wall tile remove. Any suggestions welcome thanks.

 

[cjg]

it looks like a standed tap , just take the top off and go to your local plummers with it , sorted!!

 

[ShaunCorbs]

Or worse case just change the handles to something that you like with either a screw or grub screw fixing etc

 

[Ricky]

Or worse case just change the handles to something that you like with either a screw or grub screw fixing etc

or go to someone like

The Home of TapMagician

Everything you need for the DIY plumber and tradesman to repair a leaking tap at low cost

www.tapmagician.co.uk

 

[ShaunCorbs]

or go to someone like

The Home of TapMagician

Everything you need for the DIY plumber and tradesman to repair a leaking tap at low cost

www.tapmagician.co.uk

But that doesn’t sort the loose handles out

 

[Ricky]

But that doesn’t sort the loose handles out

it possibly does if you get correct tap valve to match head splines, tap valves are nightmare

 

[Ricky]

it possibly does if you get correct tap valve to match head splines, tap valves are nightmare

obviously not if the haed is striped inside