Search the forum,

Discuss Newly qualified gas safe engineer in Essex/London araea in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Tony

Gas Engineer
Messages
39
Hi guys, I have just joined this forum, am a newly qualified registered gas safe engineer in Essex area and am looking for a job in Essex/London area. I have put in applications but meanwhile I am also in need of someone to take me up paid or unpaid, so I can keep up with my skills.
please your advice/help will go along away

Cheers all,
 
Thanks DuncanM, really appreciate your response. Have actually flag up a company as well waiting to see what the future hold but in my waiting just want to put up with someone for continuity in this great business.
 

Reply to Newly qualified gas safe engineer in Essex/London araea in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
397
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
237
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
314
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
182
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock