Discuss No Heating or Hot water AlphaCD25C in the Central Heating Forum area at PlumbersForums.net

Messages
2
My partner has an Alpha CD25C fitted and worked until a couple of weeks ago. Intermittently it will switch off after working for 4-5 days.
When checking the boiler lights A + B flashing red alternately and light D is green. Tried doing a reset and switching off the main power and restarting.
Also it doesnt seem to want to work when doing and override on the programming.
Any clues,

Many Thanks

Mick
 
States in the manual a pressure issue, if the pressure is fine, then it could be the pressure switch or the pcb - an engineer would be needed to confirm this.
 
Last edited by a moderator:

Reply to No Heating or Hot water AlphaCD25C in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
217
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
392
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Replies
1
Views
167
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock