Discuss olci construction training anygood? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

goolok78

Hi just wanted to know if training with this company to become a plumber is actually worth it,had a look around and these seem the best although don't wanna part with 6 k and have no job at the end of it. Will i be employable with a city and guilds 6129 certificate? Any feed back would be greatly appreciated thanks
 
Did my 6129 with OLCI in Bristoland passed in July 2009. I went self employed(and love it), I think this is the only way at present . Good Luck
 
You won't be employable. Minimum NVQ2 or SVQ3 to get a job.
Only route is out on your own with little knowledge and basic skills. A bit like learning to swim by being thrown off a 10m platform:eek:
 
Don't know where you are situated but I did my course with N.T.P.S. training in Hyde Nr. Manchester. The course was a lot cheaper at around 4K. They are very friendly and flexible and accept payments as you go along. My son-in-law did a course a few years back with a company in London, he paid up front for a part time course. He had difficulty sometimes getting booked in for each practical module and had to wait for the next vacancy. After a year he hadn't completed all the modules and hidden in the small print it said he must pay again for each module still left. He had one left and it cost him another £700 (believe the course was about 7K for 10 modules).
 
I have an OLCI course and due to a break down in a relationship I am left with it.

It is for City & Guilds Level 2 Certificate (6129); also helps prepare you for City & Guilds NVQ 2 (6089) in Plumbing.

We also got four extra courses which are - Unvented Hot Water Storage Systems, Solar Thermal, Heat Pumps and Ceramic Tiling.

I will be creating an add on Gumtree under Plumbing Course, Edinburgh. Please take a look if you are interested.
 
hi thanks for ur reply just wondering if u did ur nvq level 2 with olci aswell as thats what they recently told me would be included when they came round. Did u have no problems finding work to do afterwards or was there plenty? thanks
 
Why not look for a college that you could go to, I did my 6129 at Kingston College it took 11 months and was a lot cheaper than 6k, I’m doing the NVQ with them at the moment and, that has cost nada
 
Hi, I did 6129 with OLCI at Manchester. @ 43 I new I wasn't going to be employed by any one so set out on self employment route doing general plumbing and bathroom installations. Five years later and still here. I found that once self employed, through business link and associated bodies there is a certain amount of funding available for training and have been able to consolidate skills and qualifications with their help. I found that to make a go of it plumbing was only one of many skills neccessary. you need to be a good all rounder. I'm now doing my part P with OLCI but under no illussion that I'll be able to walk out of the centre kitted up and ready to go.

Would I do it again?

Absolutely.
 
I wouldn't hesitate to do the course again.
 
i retrained at NTPS in hyde and found it excellent. Have been self employed now for a year and doing very nicely. Still get plenty of help from paul, one of the owners when i get stuck, definately recommend the place.
 
The old addage "You only get out what you put in" springs to mind. I have recently completed my 6129, 6089 and EAL course with OLCI. It took me nearly 3 years to complete due to my current job (hardly fastrack I know) but the flexibility of training was what I required. The only complaint that I had was from the admin support which at times was particularly poor although I must admit I have seen an improvement in recent months.
Any form of distance learning is going to be difficult and requires you to be self disciplined. Don't expect to turn up for exams having skimmed over the books and pass. Failing to prepare... Prepare to fail. That said there is more than enough support available, but you need to ask for it. If you find yourself struggling to understand the material there are plenty of other reference books available via amazon etc that may help (I used the JTL books which were great).
I cannot speak highly enough of the training centres. I conducted my package at the Birmingham Centre and the staff there were really helpful and are still on hand now if I need any advice. Ultimately it is down to you as the learner to maximise your time at the centre.
After the technical certificate is achieved is where most students hit a brick wall. There are many adverts offering work placements but in reality unless you are in Central London you will not get one. This is not purely an OLCI problem every training company out there will offer you the world (its their sales pitch). However, if you are committed to changing your career (if your considering spending over 5k I would suggest you are) then you really need to start advertising yourself to the market. Nobody is going to give you something for nothing. Forget any possibility of getting paid to conduct work experience for your NVQ, it will not happen. I must have written to over 100 companies requesting assistance, I got 5 responses and only one workable offer. Top tip always finish your letter with a comment that you will contact them in the near future to discuss any opportunities; this may cause a handful of people not to put your letter straight into the shredder! I then undertook work experience whilst I was on leave. It is possible to rush through NVQ assessments but your knowledge and experience will be extremely limited and I doubt very much that you will be ready to go it alone. Get as much experience as you can from people in the trade, this where you will learn the skills. Even though I've completed my NVQ I am still helping out a company for free as the expeience is priceless.
Apologies for this being a bit long winded but I think OLCI have come in for some unwarranted critisism of late (Don't get me wrong I'd be thge first to say if I thought they were not up to the mark). In sum OLCI can give you the knowledge however, it is down to you to gain the experience. Don't expect everything to be done for you.
 
I also have an olci course available if anone is interested 6129 technical certificate, 6089 nvq level 2 training and certificate ,solar ,heat pump, and unvented training and certificates .Course available due to change in personal circumstances
 
Status
Not open for further replies.

Reply to olci construction training anygood? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top