Search the forum,
  • Thread starter tony_b
  • Start date
  • Replies 9
  • Views 2K

Discuss PM's in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tony_b

I have sent several Pm's to Gasman and 1 to Croppie today but neither have got back to me, is there an issue with my Pm's?
 
Great, many thanks.. I wasnt sure my message were getting through. I will leave it with you.

Cheers
 
I have sent several Pm's to Gasman and 1 to Croppie today but neither have got back to me, is there an issue with my Pm's?

its showing you have sent me a pm but its not showing me your message,saying that i work so dont see them until late
 
its showing you have sent me a pm but its not showing me your message,saying that i work so dont see them until late

That's why I thought I would put a message up on here, I had a feeling that my message were not getting through properly
 
Status
Not open for further replies.

Reply to PM's in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
255
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
158
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
314
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
439
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
153
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock