Discuss Pop up basin waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

nicro3

Plumbers Arms member
Plumber
Messages
815
Had today to repair leaking pop up waste on plastic vanity basin. The customer says was done before by a n other. The problem is the over flow is a banjo type, meaning tail of waste is to short to attach to pop up part on other side of over flow and use washers. Does any one know of a pop up that has longer tail (the waste going through hole in basin)?
 
I don't fit them anymore, they always break, especially with kids in a house. I use a non mechanical waste that looks terrific called a captive waste. It contains a polished chrome swivel plug that doesn't come out to get lost and no mechanical parts that can get broken:

Captive Basin Waste | NoLinkingToThis
 
I agree captive wastes are nice, got to convince my customer of that . Just wondered if any longs tail pop ups on the market, before offering an alternative
 
I agree captive wastes are nice, got to convince my customer of that . Just wondered if any longs tail pop ups on the market, before offering an alternative
Offer the captive as a long term alternative. Pop ups are cack, as are sprung wastes. Captives have no mechanical parts that can break and no plug and chain to cause bother either.
 
I don't fit them anymore, they always break, especially with kids in a house. I use a non mechanical waste that looks terrific called a captive waste. It contains a polished chrome swivel plug that doesn't come out to get lost and no mechanical parts that can get broken:

Captive Basin Waste | NoLinkingToThis

Agree on this one, but mostly use a click clack, these pop up wastes drive me crackers !
 
Agree on this one, but mostly use a click clack, these pop up wastes drive me crackers !
Next time why not try a captive instead. By the way the same ones that Screwfix sell for ÂŁ9.99 are available on Ebay for about a fiver each.

All my customers have been impressed and rave about the captive wastes. Simplicity, functionality, they work and don't break!
 
Next time why not try a captive instead. By the way the same ones that Screwfix sell for ÂŁ9.99 are available on Ebay for about a fiver each.

All my customers have been impressed and rave about the captive wastes. Simplicity, functionality, they work and don't break!

That I will Sir !
 
i stopped using pop ups when a biggish company recalled all there because of problems they where the only compnay to recall theres ! one of the managers at the branch told me that there suppliers supply to alot of even bigger companies so there somes to be alot of dodgy ones about. but they are all pretty pants even before the recall.
 
Status
Not open for further replies.

Reply to Pop up basin waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi Everyone, I recently brought a replacement Pop Up Waste from Argent K316-DL & the spec states it suits both overflow & non-overflow basins...
Replies
6
Views
663
Hi - I have a Spring Operated Pop-up Basin Plug (not the rod type) It moves up and down freely but it won't stay down so I can only use the...
Replies
2
Views
269
Hi guys, I have just installed a pop up waste on new basin. I have siliconed the top with the washer, and the water holds inside the basin with...
Replies
3
Views
858
Hi, We're in the process of upgrading 2 bathrooms in our house: the ensuite and the family bathroom. These adjoin one another. The ensuite is...
Replies
3
Views
101
just put a new pop up waste into my basin to find the trap does not fit correctly.. the trap fits just inside the waste thread opening and butts...
Replies
7
Views
886
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock