Search the forum,

Discuss Posting videos on the forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Hi guys is it possible to post a video on the forum tried but no joy ?cheers kop
 
Works for me take the url for the vid and just put it in the vid icon (next to the pic one)

 
I wanted to post a dodgy Valliant burner it downloads but it wont let me attach it ?
 
from your phone or computer if so use attach/upload file
 
Phone or tablet shaun

20170416_165626.jpg


20170416_165636.jpg
 
You can't attach a video the same way you attach a pic.

You'd have to upload it to somewhere like YouTube and then link to it. (If you just paste the URL into a thread it gets automatically embedded / inserted you don't need to click the video icon)

We would hammer the hosting space if we let everybody upload videos.

We have it set on tilersforums and limit who can add them etc so it's something we can do in the future maybe but wouldn't work today I'm afraid.
 
No worries Dan lost my top contributor flag been on each day posting whats all that about cheers kop
 
No worries Dan lost my top contributor flag been on each day posting whats all that about cheers kop
It's completely automatic matey.

Current rate is 100 posts in 50 days. Runs a count every 20 minutes to reissue the tag. Or remove it.

Even staff can lose it.

It's the most fair way. :)
 
Status
Not open for further replies.

Reply to Posting videos on the forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
74
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
225
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
226
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock