E
ed209
Fan stop start, when you release cover a little fan run constantly but not enough pressure to activate APS
Swooped out APS, tried two, still the same
Baxi think it may be the GV but if I unplug it still does the same, it is more likely the PCB but the resistance levels are not right on the GV so don't want to put new PCB in case GV knocks out new PCB as well
Any advise please
Ps i think its a white/Rodgers GV (Baxi not to sure themselves)
Swooped out APS, tried two, still the same
Baxi think it may be the GV but if I unplug it still does the same, it is more likely the PCB but the resistance levels are not right on the GV so don't want to put new PCB in case GV knocks out new PCB as well
Any advise please
Ps i think its a white/Rodgers GV (Baxi not to sure themselves)