Pressure testing - how do I do this ?

[Ch4 plumbing]

Quick question on this how is the braided hose on RP30 connected to hit & cold pipe work for testing same question for central heating pipe work

Normally a male copper to iron (1/2")

 

[rpm]

Quick question on this how is the braided hose on RP30 connected to hit & cold pipe work for testing same question for central heating pipe work

Look at post #15 mate.

Opps Ch4 got there first.

 

[jambo]

right I get that but connecting this fitting to the system would it have to be teed in with a service valve then once connected and system then fill

 

[ShaunCorbs]

right I get that but connecting this fitting to the system would it have to be teed in with a service valve then once connected and system then fill

No if it's got a return filter if heating or a tap if cold or hot water

 

[jambo]

not quite getting what your meaning if you could elaborate on it please would be appreciated

 

[ShaunCorbs]

not quite getting what your meaning if you could elaborate on it please would be appreciated

The system got an external filling loop / return filter ??