Pump problems

[John.g]

Can you post a close up view of the tank label above as there are some settings on that I think but can't read it,

 

[ShaunCorbs]

Hi Shaun,

How do I know what the "max pressure set" is? There is a pressure meter on the pump showing 2 bar (can be seen in photos above).

Cheers

Turn the pump off elec wise and open a cold tap wait for the water to stop

Then get a pressure guage and there should be a shrader valve on the pressure tank read the pressure should be 1.8 bar if the pump is set to turn off at 2 bar etc

 

[JamesKam]

Turn the pump off elec wise and open a cold tap wait for the water to stop

Then get a pressure guage and there should be a shrader valve on the pressure tank read the pressure should be 1.8 bar if the pump is set to turn off at 2 bar etc

Ok thanks very much I will try that.