Search the forum,

Push-fit for toilet run

Post new thread

Discuss Push-fit for toilet run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

EdFromGreenwich

Hi, I have a "horizontal" run of 4m from the toilet to the stack with a long bend and 2 tees a tees along the way. Can I use push-fit connection pipes (Floplast) or do I need to use solvent weld? Many thanks. Ed
 
Yes you can use either

But depending on what your doing building control might need to be notified
 
Status
Not open for further replies.

Reply to Push-fit for toilet run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Non-Standard pipe connection - please help!
Hi, I have an opening on the 'manifold' (I think that's what its called) on my soil pipe. It appears to be a non-standard size - about 51mm internally. I'm trying to connect a 40mm floplast solvent weld pipe, and can't find a boss adaptor that even nearly fits. I can't cut a new hole above...
Replies
9
Views
807
snowhead
snowhead
B
Connecting new toilet to waste
As part of a slow DIY bathroom refit I've removed the old toilet from the original location next to the soil pipe (and obviously capped off the branch) and plan to place it the opposite end of the room. I was pretty lucky to find a 110mm sewer waste pipe below the old sink which is the new...
Replies
4
Views
677
Ben-gee
B
DIYGraemeB24
Toilet inlet pipe leak
Afternoon all, It appears my toilet inlet pipe has developed a leak at on of the top 2 joints (between plastic pipe into toilet and between copper pipe with isolator screw) I'll attach pic. Just wondering what the fitting is that I need. Thanks, G
Replies
5
Views
556
BenCos18
BenCos18
M
preventing rodents from getting into pipes/drain
Hi, a couple simple questions. 1. I have two pipes like seen on a attached photo in my back yard. One is for the waste from kitchen, the other one is for the waste from toilet/bathroom. Obviously rodents can easily get into them pipes.. is the any ways to prevent that? 2. And a second question...
Replies
2
Views
216
Basher
B
B
Is toilet water same as bathroom taps
Hi everyone, I turned my cold water feed off in the airing cupboard which supplies only cold water to my bathroom but it also turned the water to my toilet off is that a correct set up? Because it didn't used to before the stop valve in airing cupboard only turned off the cold water supply to...
Replies
3
Views
446
Ben-gee
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock