Hi so I changed a towel radiator in bathroom from a normal radiator.
I bunged the f&e tank and vent pipe , drained about a pint of water out the pipes.
Altered the pipes to the new rad.
Then removed the bungs.
Gone to bleed the radiator it filled slightly now no air is coming out.
I've checked the other radiators upstairs and they're not bleeding neither.
I'm confused as to why, it seems like the water isn't coming our the f&e tank as the water level stays the same.
Theys no blockage from the feed to the tank as when I push down on ball cock it starts filling .
Any advice be appreciated
Thanks
I bunged the f&e tank and vent pipe , drained about a pint of water out the pipes.
Altered the pipes to the new rad.
Then removed the bungs.
Gone to bleed the radiator it filled slightly now no air is coming out.
I've checked the other radiators upstairs and they're not bleeding neither.
I'm confused as to why, it seems like the water isn't coming our the f&e tank as the water level stays the same.
Theys no blockage from the feed to the tank as when I push down on ball cock it starts filling .
Any advice be appreciated
Thanks