Roman Bathtub tap identification

[Deleted member 96923]

Hello. I need to have one of my taps replaced(on far left) due to a slow leak and calcification at the base rings and handle, but I have no idea what brand/make the fittings are as they have no markings on them.

 

[rpm]

Even if somebody could find a needle in a haystack and identify that set I doubt if you could buy one tap alone.
Might be better and quicker to replace the complete set, Google 5 hole bath taps, prices vary from 3 digits to 4 digits though.

 

[Deleted member 96923]

Thanks for the advice, I'll look into the 5 hole taps!

 

[Chalked]

Try grohe, or Hans grohe.
But could be crosswater, or lefroy brooks.

 

[Deleted member 96923]

Thanks for the info on possible brands. I will have to cut through the tiles in order to gain access to the pipes as the bath was installed without an access panel.

 

[ShaunCorbs]

might be easier to remove the bath to gain access ?

 

[rpm]

might be easier to remove the bath to gain access ?

Think I would look into removing that shelf first, could be fixed down with silicone.

 

[Deleted member 96923]

Unfortunately it looks like the bathtub has been tiled into place, so removing it looks like a complete retiling job on all side.

 

[Chalked]

If you find the manufacturer, it might be possible to replace the insert and rings from above

 

[Welder]

It IS possible to replace from above.
The alternative is £1200 ish for retiling and bath out. #SeeItAllTheTime