Discuss Running 21.5mm condense pipe into 110mm soil pipe question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
67
Hi folks.

Is it OK for me to run 21.5mm boiler condense pipe into strap boss for 110mm upvc? No smells should come back in I'm assuming?

Any suggestions where to buy adapters? Ideally all solvent weld as will be internal of property.

Thanks very much
 
Internal I hope ??
 
Hi folks.

Is it OK for me to run 21.5mm boiler condense pipe into strap boss for 110mm upvc? No smells should come back in I'm assuming?



Any suggestions where to buy adapters? Ideally all solvent weld as will be internal of property.

Thanks very much

Why are you moving it ?
 

Reply to Running 21.5mm condense pipe into 110mm soil pipe question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

[ASIDE: I did wonder if this was the best forum for this but figured as it was a boiler related issue that the gas engineers would be dealing...
Replies
5
Views
269
J
Hi all, Just in process of relocating kitchen & utility to other side of house but have a question re venting requirements. I intend to connect...
Replies
0
Views
680
Joeab88
J
Been researching as much as I can and think have a good gist about recommended waste pipe sizes, types of bends etc so now just looking to fit the...
Replies
3
Views
1K
Hello, I would very much appreciate some help/feedback on what I am proposing for my very small ensuite bathroom. While refurbishing it I’m...
Replies
1
Views
4K
Hello. I'm connecting a long run of 50mm solvent weld waste pipe from a shower to the stack (compliant with regs hence 50mm). The soil stack...
Replies
0
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock