Discuss Salus to Worcester wiring in the Central Heating Forum area at PlumbersForums.net

Messages
4
Hi all. I have just purchased a wireless room thermostat for my central heating. I've come to wire in the receiver to the boiler and found the boiler manual (Worcester 28i jr) calls for three wires, as I expected but the receiver (salus rxrt510) depicts four terminals. I'm not 100% sure which wires to send where. Any help will be gratefully received. I attach relevant diagrs for perusal.
Screenshot_20191101-181513.png
IMG_20191101_183106490.jpg

Thanks in advance
 

Attachments

  • Screenshot_20191101-181513.png
    Screenshot_20191101-181513.png
    111 KB · Views: 13
Do you already have a room thermostat?
 
Then as your job requires wiring internal to the boiler eg wiring inside the boiler best option is to get a gas safe engy to install your new stat
 

Reply to Salus to Worcester wiring in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi Fellow Engineers I've attached a wiring diagram I've just completed, I wanted to make sure I've got it correct. Looking to install 2 Nest...
Replies
3
Views
397
Hi, I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler. It has an...
Replies
0
Views
455
Hi I have changed my Honeywell T6360 thermostat to a Salus T105RF wireless thermostat. There was three wires going to the original honeywell...
Replies
5
Views
890
Deleted member 120897
D
We have an all Vaillant setup - an EcoTEC Plus 637 system boiler plus wired VR720 and VR92 SensoCOMFORT controller, driving two CH zones plus DHW...
Replies
4
Views
611
Hi Everyone - despite my best efforts I can't seem find a clear answer on how to wire a single channel Hive Receiver to a Worcester Bosch...
Replies
2
Views
3K
Back
Top