Discuss Sani question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jonnyswamp

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,824
Need a Sanispeed or Sanicom type set up for a job I'm pricing
Long waste run from 2 sinks and 1 WHB, 3 won't get used together apparently, just needed for health and safety purposes in a new kitchen/canteen
Will the Sanispeed do the job or would it have to be the Sanicom
Or is there another make that's suitable
Thanking you
 
Please define long? And can you get the discharge to fall over the distance?

(might be a short delay now as the curry just arrived) lol
 
It's over 20 m, all internal and plenty of fall
Stack is 4m away from Sani? site

Edit
Just checked and is 4m really the max a 50mm waste can run
 
Last edited:
Please define long? And can you get the discharge to fall over the distance?

(might be a short delay now as the curry just arrived) lol

anything nice?
 
2 wash sinks as in commercial (move on croppie nothing to see here!) as in large restaurant kitchen?

Not sure where the 4m comes from, with the correct height I`m thinking 40m.
 
It's a caravan showroom's new canteen/kitchen
Not many staff and 2 sinks and a whb only to comply with H + S requirements
Don't know what site gave me the 4m restriction
Just wanted to know if the Sanispeed was ok, or would the Sanicom be a better choice
Or, is there another make that's suitable
 
It's a caravan showroom's new canteen/kitchen
Not many staff and 2 sinks and a whb only to comply with H + S requirements
Don't know what site gave me the 4m restriction
Just wanted to know if the Sanispeed was ok, or would the Sanicom be a better choice
Or, is there another make that's suitable

Are you going to install a grease trap ?
Part H I think will require one & depending on what is being cooked / washed up, it will stop the Sani acting as one.
 
My choice would be from the Sanispeed, Grundfos Sololift2 C-3 or the Dabnovabox for easy diy cleaning.
 
Thanks for the suggestions
Re the grease trap, if it should be fitted, it will
 
Status
Not open for further replies.

Reply to Sani question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock