Search the forum,

Discuss service portable fire? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Napper

Hi,

I dont like anyone using portable gas fires inside but ive got some servicing in a school for their portable gas fires.

can anyone point me at the reg covering these or know of any issues with using in class'?

I can service but want to gen up on reg and hopefully find reason to remove asap
 
Ok it seems i cant service as i dont hold cablp1!
despite having tickets for boats caravans and mlv??

so my query changes, i can advise customer the htrs need to be sent to calor for service but cant make them do it, what about their use, quantity, gas storage, ventilation etc?
there were 2 in a class with 13kg in each,(not to mention CO readings) regs for dwellings say 15kg max so removed but what if they have others elsewhere are they really only allowed 1 or 2 in entire school (are com regs different)?
I dont think they are safe where they are being used and so surely its my responsability to inform the customer/school?

called gassafe for assistance and all they would do is state training req cablp1...
"ok i wont work with them but what are the regs so i can advise site on requirements?"
"training requirement is cablp1"
grrrrrr!!!!

HELP!
 
Tell the customer not to use them would be my advice and that they could be dangerous , sorry cannot advise further as dont know TBH
 
Famous words in my book

I can't service them sorry as I'm not suitably qualified. But I would suggest you contact calor
 
I would not get involved myself as you may advise wrong which could be worse , pass it over to someone who deals in them all day long would be my advice good luck
 
Status
Not open for further replies.

Reply to service portable fire? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
278
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
130
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
215
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
257
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
311
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock