I have a isolating stopcock in my bathroom but it switches off both the w.c inlet and the shower. As the shower plumbing is buried in the wall under the tiling, will my only option( for a sole shower isolating stopcock ) will be to install it in the loft? Would be glad of your advice.Thanks
Discuss Shower isolating stopcock query in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,365
- Solutions
- 2
Yes as Riley said find the pipework to the shower and fit one as close as possible
Also you need / will want a full bore ISO / lever valve
Also you need / will want a full bore ISO / lever valve
- Status
Reply to Shower isolating stopcock query in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
- Question
Boiler is SIRIUS THREE FS 70 Potterton commercial.
Situation: We are small building contractors and my labourers managed to damage the radiator...
Hi all,
I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Creating content since 2001. Untold Media.