Search the forum,

Discuss Supplying new gas connections and meters ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

on31ll

How does a business go about this ? Apart from the obvious national grid and united utilites for water there are a few small private companys that provide the services of new connections and meters etc. now how would a business go about that ? Because in my area there isnt really a business supplying them just the grid etc. worth getting involved ?
 
Expensive. We used to use npower business as they were the business. Fulcrum (now Carillion) do all connection work, we did kiosks and got npower direct subby to fit meter and then we installed pulse meter connections to BMS. Commercial metering is slow a moment I believe due to lack of new builds/ revites. U might get a start as a subby capping off pubs and chipshops .... Lots going under about 4 a week!!
 
How do you start the ball rolling ? What lists do you have to go one ? What training do you have to do ?
 
Commercial, domestic core and metering. It's closed group . Smart meter upgrades might be way in tho.
 
Im talking about the actual connections from the road in HDPE. When i worked away it was always a private small company that did all the upstream side and the meter. Thats what im talking about.
 
Status
Not open for further replies.

Reply to Supplying new gas connections and meters ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
440
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock