.... Tf1 brass valves ....

[ShaunCorbs]

Are they 3/4” they don’t look 1” but might be wrong as pics don’t look 100%

 

[Aquarius]

The pipe end or threaded end? They come as 22mm and 28mm. This any good? https://fernox.com/wp-content/uploads/sites/3/2017/12/tf1_omega_filter_with_valves_v.004.pdf

 

[Harvest Fields]

Sorry mate. I don’t fit them.

 

[ShaunCorbs]

The pipe end or threaded end? They come as 22mm and 28mm. This any good? https://fernox.com/wp-content/uploads/sites/3/2017/12/tf1_omega_filter_with_valves_v.004.pdf

threaded end mate eg filterbody

 

[exedon2]

Tf1 or Tf1 omega? Union nut on both 1in the omega is a straight swap for original Tf1 no stupid big 0 ring to leak 25year warranty

 

[ShaunCorbs]

Old tf1 the lids blown off tonight so need to go round tomorrow and link it out as I haven’t got time to drain and replace yet as it’s tight onto the plasterboard (the bottom of a filter) so an omega won’t fit

 

[exedon2]

2 1 in male iron to copper it is then lol seem to remember you can leave omega at an angle?

 

[ShaunCorbs]

2 1 in male iron to copper it is then lol seem to remember you can leave omega at an angle?

Ta will pick up some tomorrow

 

[Aquarius]

threaded end mate eg filterbody

Wouldn’t know as only fit valveless type.

 

[Scott_D]

Could you stick a valves omega body in there? Job done