Discuss This thread about a job in York in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,021
Gas Engineer wanted in York, N. Yorkshire to install Unvented Cylinders & pair of boilers in tandem

Went to look at this job.
I don't want to comment too much, but the whole jobs a mess. The client is trying to get a quality job, without paying quality installers. He's had a guy on labour only. All pipes are in the same notch,so the cold will become hot. Nothing insulated. Nothing clipped. Pipe work undersized.
I advised more than has been posted. But he hasn't got the budget or experience to sort it.
Wouldn't touch it with a barge pole.
 
thought so or he was trying to do it himself :)
 
what did the installers work look like?
 
Yes it was copper, but was notched into joists with no felt lining al 7, 22mm pope in on notch.
I blame the client tbh.
 
Yes it was copper, but was notched into joists with no felt lining al 7, 22mm pope in on notch.
I blame the client tbh.

trying to get a domestic plumber to do a com job :D for low prices

did you get any pics?
 
Last edited:
i see you found a mate to do the job ?
 
Nowt to do with me Shaun. Wish I had not seen it. The client is too tight to pay
 
No mate.
Whoever goes will have a shock. All the main plumbing is done, jobs been plastered. But no drainage! No soil pipes, no wastes!,
 
Status
Not open for further replies.

Reply to This thread about a job in York in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Having a bit of a mare; some of you may recall but after having my last shower installation botched (but thankfully getting my money back...
Replies
13
Views
5K
  • Locked
A guy who I have done quite a lot of work for is due to buy a block of seven or eight flats in the New Year all of these flats will require...
Replies
61
Views
429
K
  • Locked
Hi, I'm new, I've got a plumber doing some renovations for me and I'm not sure whether what he's doing is correct/appropriate. It's a 1930s end...
Replies
19
Views
2K
  • Locked
Right, firstly I've always put my trust in my clients. A lot of the time I'll complete work then send invoice and expect prompt or reasonable...
Replies
8
Views
1K
newcastle phill
N
R
  • Locked
Hi All Permit me to introduce you to the the Johnson Magnetic Filter. Designed and built in the UK by registered gas engineer Neil Johnson, from...
Replies
38
Views
5K
smtplumbing
S
Back
Top