Search the forum,

Discuss Traditional and systems boiler for gas portfolio? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rich2012

In my level3 gas portfolio I need to do a service for a traditional boiler and a systems boiler

I have serviced a ideal classic rs40 which is open vented - is this classed as traditional boiler?

Also I have serviced a ideal classic rs250 with an expansion vessel which is a sealed system - could this be classed as a systems boiler as they both have the old style burner and balanced flies?
 
Yes to traditional but was the expansion vessel built into the rs250 ? if not then it to was traditional heat only.
 
I did the service a while ago so can't fully remember, from what I've seen on the net is that there is a standard explanation vessel for certain variants of the 250
 
Status
Not open for further replies.

Reply to Traditional and systems boiler for gas portfolio? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
155
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
254
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock