Discuss Traditional and systems boiler for gas portfolio? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rich2012

In my level3 gas portfolio I need to do a service for a traditional boiler and a systems boiler

I have serviced a ideal classic rs40 which is open vented - is this classed as traditional boiler?

Also I have serviced a ideal classic rs250 with an expansion vessel which is a sealed system - could this be classed as a systems boiler as they both have the old style burner and balanced flies?
 
Yes to traditional but was the expansion vessel built into the rs250 ? if not then it to was traditional heat only.
 
I did the service a while ago so can't fully remember, from what I've seen on the net is that there is a standard explanation vessel for certain variants of the 250
 
Status
Not open for further replies.

Reply to Traditional and systems boiler for gas portfolio? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
579
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
310
PSxxxxxx
P
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
361
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
487
Back
Top