Search the forum,

Discuss Training and need some help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
23
Hi guys

As i have said in my previous posts i am doing my gas foundation at college.

I currently go out with an engineer now and then to build up my portfolio but jobs are few and far between as he only does this next to his day job.

And doesnt really touch anything else bar boilers.

I am just putting it out there that if any engineers need a hand on any installs, services, gsllc, or breakdowns on boilers, fires or cookers and are in the sutton coldfield area or Birmingham in General.

Let me know, i do not want any payment and i have my own transport and tools (not all of the tools needed as im still building up my tools).

I dont mind doing all the labouring and heavy and dirty jobs as long as i can shadow you and get my pictures for college is a massive help to me. And if that helps you along the way then great.

I only have available saturdays at the minute as i work all week apart from Tuesdays where i go to college and every Sunday i work also to make up my hours lost.

So if you need a hand with anything stated drop me a line on here or if you want my number let me know.

I repeat i will help out FOC.

Thanks Guys
 
Good luck hug
 
Status
Not open for further replies.

Reply to Training and need some help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
170
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
316
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
157
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
464
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
545
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock